Aluminium Titanium Boron Bar-颗粒精炼剂,环保精炼剂,无烟精炼剂,铝钛硼丝,佛山市南海三湘铝业材料有限公司

Metal Intermediate Alloy

Contact Us

Foshan Nanhai Economic Development Zone North Park State Road No. 3
189-3435-7088
189-3435-7088
2462683485@qq.com
www.fssanxiang.com

Aluminium Titanium Boron Bar

Product name：Aluminium Titanium Boron Bar

Detailed introduction：

SX-Al-Ti—Ba

Main Features
1 .This product is 9.5mm wire rolled with advanced equipment and wound into bundle with bright silvery white and appearance and neat and close arrangement.
2 .During casting of aluminium bar, it is added from launder to reduce burning caused by furnace feeding.
3 .Titanium and boron are evenly distributed with low level.

Thinning advantages
1 .It can improve internal structure of aluminium bar obviously.
2 .It can improve final mechanical performance of product to a great extent.
3 .It can reduce extrusion pressure, energy consumption and die loss.
4 .It will improve extrusion speed and production efficiency.
5 .It will improve rate of finished product.
6 .It will improve uniformity and brightness of oxidation coloring.

Technical parameters
1 .content of Ti:4.5-5.5%, B：0.8-1.2%， Al：Margin
2 .Nominal Diameter of product Φ9.5mm wire, deviation 0.5mm
3 .Bundle diameter 360 ±25mm, 750±25mm
4 .bundle weight 170±20kg
5.calculation of bundle length:Length (m)=Bundle weight(kg)÷0.192(kg/m)
6 .Wire elongation rate :δ50≥12%

Use method
The adding rate shall be calculated in accordance with titanium content of alloy to be produced, It can charged from launder through electric withdrawing or hand operation.

Packaging and storage
It uses transparent plastic film for packaging with wooden tray on the bottom ,The warranty period is one year .

High-tech Products Metal Intermediate Alloy Element Additive Series Solvent Additive Series